-40%

Lepro E1 AI Permanent Outdoor Lights

$91.79 – $227.99

Length

50ft
100ft
150ft

Clear

Description
Reviews (0)

Download & Register

What They’re Saying

AI Smart Lighting

Lepro APP Voice Control

Music Sync

Warm White

Daylight White

RGB+IC

Timers

Group Control

Package List

Size

How to Install

Waterproof

How to Connect to Alexa

Product Specifications

APP Control (No Remote)	1. Download the “Lepro” APP (not compatible with the “Smart Life” or “Tuya” apps). 2. Register a user account (only an email address is required; no phone number needed).
Connect Lights to Wi-Fi	2.4 GHz only: This allows access to all app features. You need to connect to Wi-Fi before connecting to Alexa. To ensure a successful Wi-Fi connection, please place the controller in an area with a strong Wi-Fi signal. If the controller is in a location where your phone has no Wi-Fi signal, the lights won’t be able to connect to Wi-Fi.
Connect to Bluetooth	You will have access to most app features (except Alexa connectivity), such as DIY, On/Off, AI Voice Prompt, and Add to Favorites. Bluetooth control distance: approximately 5m / 16.5ft.
Smart Home Integration	Works with Alexa and Google Assistant. (Does not support IFTTT, HomeKit, or Matter.) Please note that the phrases Alexa can recognize are limited. For example, there is no utterance for adjusting brightness and color simultaneously as per the official Alexa guide.
WLED Compatible	Each LED node is equipped with two built-in WS2811 ICs (one for RGB lights and the other for white lights). The commercial-grade IC design allows seamless integration with WLED software. (Note: The output voltage of the Lepro original power adapter is 29V, and the input voltage of the string lights is 24V-30V. To connect with WLED, you will need to purchase a separate 24V WLED controller and 24V power supply units.)
Weatherproof	Power adapter IP67, in-line controller IP65, lights strings IP65
Package List (NO Remote)	6 x 3m/10ft string lights (15 LED nodes / string, 90 LED nodes in total), 2 extension cables (1 × 3m/10ft, 1 × 1.5m/5ft), 1 × in-line controller, 1 × power adapter, 100× 3M double-sided tape (each LED node has 3M tape on the back; 10 extra pieces of 3M tape are included in the package). 90 × screws and 90 × plastic expansion anchors.
Wire Length	4.5m / 14.7ft (from the adapter plug to the first light string, including the in-line controller wire length)
Extension Cables	2 extension cables (1 × 3m/10ft, 1 × 1.5m/5ft). You can add it between the controller and the first light string, or between two light strings. Do not add it between the power adapter and the controller.
In-line On/Off Controller	It will remember the pattern you set on the app. The controllers for these 3 light sets (50ft, 100ft, 150ft) cannot be used interchangeably, as their programs are different. Each has its own maximum connection limit. Currently, it’s not possible to control two sets of lights with one controller. You can use the group function in the app for basic control over two sets (e.g., turning them on/off at the same time or setting the same color).
Do Not Cut the String	The current firmware version doesn’t support cutting the light string. If you cut it, the data recognition for the 15-light-per-string setup will malfunction. For example, if there are 90 lights in total and you cut 10 lights, leaving 80, the app might recognize it as 75 lights. If it recognizes only 75 lights, the last section will not light up.
Extend the Length	Currently, 15-light strings are not sold separately. We offer 50ft (30 lights, 24W power), 100ft (60 lights, 36W power), and 150ft (90 lights, 48W power) sets. For 50ft and 100ft sets, you can add one extra string (e.g., extend 30 lights to 45, or 60 to 75). The 150ft set cannot be extended due to signal transmission issues.
Power Adapter	Input: 100-240V AC, Output: 29V DC, 1.65 A. Lights working voltage: 29V DC
Lights Spacing	50cm / 20 inches
Upgraded 5-in-1 LED	RGB+IC LED Lights and tunable white LED Lights (choose any shade of white lighting, from incandescent-like 2200K warm white light to 6500K cool white light)
Brightness (Dimmable)	40 lm for Warm/Cool White Light; 20 lm for RGB Light. Dimmable with app control. Dimmable features are available on the app screens for Save, Music Sync, and AI Prompt Results. In the current version of the DIY interface, overall brightness adjustment is not available. However, since this is an RGB+IC product, you can adjust the color, brightness, and saturation for individual segments. The ability to adjust the overall brightness in the DIY interface is expected in the mid-November update.

Download APP, APP Setup & Navigation, Product Test

APP Setup

1. Download the Lepro APP (no remote, not work with Smart Life/Tuya APP)

2. Register a user account with an email address

3. Connect to 2.4 GHz Wi-Fi (not work with 5 GHz). If the controller is in a location where your phone has no Wi-Fi signal, the lights won’t be able to connect to Wi-Fi

Reviews

There are no reviews yet.